Overhead crane end carriage introduction

 Overhead crane is a kind of horizontal frame on the rails at both ends of the plant. The lifting trolley can run along the main beam load. The main beam can run longitudinally along the two sides of the track, and the space below is used to lift materials. There are two crane end carriages which are installed at the two ends of the main beam, respectively, to support the overhead movement of the bridge, usually made of Q235B steel and so on.

end carriage

The end beam plays an important role in the operation of the overhead crane and is a key component of load translation. The end carriage includes two parts, a wheel and an end beam frame. The end beam frame is composed of an upper cover plate, a web plate, and a lower cover plate, and is fastened by bolts using connecting plates and angle steel. Generally, reinforcement ribs are installed inside the end beam to improve the mechanical stability of the end carriage. Now new type end carriage usually adopts rectangular tube with wheels. When designing the overhead crane end carriage, the size of the end carriage should be designed in conjunction with the parameters of the main beam span, large wheelbase and small wheelbase. When installing a crane, generally connect a section of the end beam with the main beam, and then connect the two ends of the end beam.

 The end carriage is an important force-bearing component of the crane. Due to manufacturing, installation, and improper operation, it can cause hard air rails and other problems. Periodic maintenance is required during use.

LEAVE A MESSAGE

We will reply you in 24 hours.

Product: Overhead Crane Gantry Crane Port Crane Jib Crane Electric Hoist Spare Crane
Lifting Weight: 1-10t 10-20t 20-50t 100-300t 100-300t 300-600t >600t
*
*
*
*
Send Inquiry×

The price will be sent soon via email.

Chat on WeChat×

+86-13673380973